19 3/8 x 27 3/16, Sonoma Stainless Cooking Grids - 53S43

RRP: $185.60 (You save $18.56)

Lowest Price Guarantee



Set of 3


Altima Models: PF30LP

Sonoma Models: PF30LP


Material : Stainless Steel Wire

Dimensions : 19 3/8 inch x 27 3/16 inch

This item is not an original manufactured part.


To ensure you choose the correct replacement part for your grill, we recommend removing the original part and comparing it to what we list.  You can also check your owner's manual to make sure this part will work with your grill.

Ask The Experts
Part #:


  1. Poor workmenship

    The grates' crossbars were not welded at 90 degree angles to the long bars. Consequently, the grates did not fit squarely in the grill. One cross bar protruded about 1/4 inch at one end and almost 1 inch at the other. I had to grind off part of the rod so it would fit inside the grill. Additionally, the bars are not very thick when compared to Weber stainless bars (about 1/2 the diameter), yet the price was rather high. Overall, I would not have ordered these grates had I known about the poor quality.

    Verified Customer Richard G Cobler - 18th Jun 2020

  2. Will not fit Altima PF30LP Grill

    My Altima by Sonoma Grill Model #PF30LP Grill Grates are 17.5" x 8.75". The original grates are obviously not stainless steel, but stainless steel coated, or I would not be looking for new ones...lol Not sure what these are, but I would verify the actual steel quality (hopefully at least 304L) before you find yourself looking to replace them in a few years. I wound up buying 316L Stainless Steel (Marine Grade) and making all 4grates that the grill requires for about $130. Good Luck!

    Verified Customer Jeremy - 12th Mar 2014

Write A Review

payment options
Copyright The BBQ Depot, Inc.BBQ Grills, Parts & AccessoriesAll Rights Reserved.