Lynx Grill Burner Types Explained – Compatibility, Upgrades & Fit

Part of the Lynx Grill Repair Knowledge Hub — your central reference for Lynx parts, compatibility, and expert guidance.

Lynx Grill Burner Types Explained – Brass, Ceramic, Trident & ProSear

Lynx has used several burner designs across different generations and internal series. Many burners look similar in photos but are not interchangeable due to differences in mounting, ignition electrode alignment, and firebox design.

This guide explains the most common Lynx burner types, how to identify what you have, and when upgrades are possible. If you want 100% accuracy before ordering, use your grill’s model and serial number to confirm compatibility.

Start here: Where to Find Your Lynx Serial Number

Quick Identification – What Burner Do I Have?

Cast Brass (Serial Numbers through Q) – heavy, solid brass construction; common on older Lynx generations.
Ceramic “Blue Flame” Burners (U series - current) – modern blue-flame style burner used on current Lynx Professional configurations.
Trident Infrared – Infrared searing burner (distinct heat output and burner design).
ProSear Infrared – High-performance rectangle shaped infrared sear burner used on grills through series M.

Important: Burner “upgrades” only exist when going from Original Brass Burners to the new Ceramic Design. You cannot swap a Blue Flame burner to a ProSear infrared burner in any Lynx grill model.

Burner Type Breakdown

1) Cast Brass Burners

Original Lynx grills used cast brass burners. These burners are durable, but over time can suffer from uneven flame patterns or clogged ports.

Typical reasons to replace: When port holes spread into larger holes creating larger flames, extreme flaking, or visible damage.

2) Ceramic “Blue Flame” Burners

Ceramic blue-flame burners are found in current Lynx models and are designed for efficient heat output and consistent performance. They are not interchangeable with infrared burners unless the grill was designed/configured to accept an infrared burner in that position.

Typical reasons to replace: weak heat output, hot/cold zones, delayed ignition, ceramic deterioration, or physical damage.

3) Trident Infrared Burners

Trident infrared burners are designed for intense, direct searing. This style burner was originally called a Prosear2 Burner and later changed to Trident. The burner style, mounting design, and ignition alignment differ from blue-flame burners. Even when a model is offered with infrared options, the firebox/attachments must support it in that specific burner.

Common misconception: You cannot simply swap a blue-flame burner to an infrared burner without the correct factory-firebox configuration.

4) ProSear Infrared Burners

ProSear infrared burners are engineered for very high searing temperatures. Compatibility depends on the grill’s original configuration and the internal mounting/ignition layout in that bay.

Rule of thumb: If your grill did not ship from the factory with an infrared burner in that position, assume it is not a drop-in swap until verified by model + serial.

Compatibility Rules (Technician Guidance)

Model number alone is not enough for burners on many Lynx grills. Internal revisions exist under the same model number.
Ignition alignment matters: electrode position differs by burner type.
Mounting brackets differ: infrared burners often require different support points than blue-flame or brass burners.
“Upgrade” does not mean “interchangeable”: Burner upgrades exist only for the cast brass to ceramic blue flame.

If you want us to confirm what fits your exact grill, send a photo of your serial tag and burner area or call 877-983-0451.

Shop Burners (After You Confirm Model and Series)

Ready to shop? Start here, then verify your exact fitment using model + serial:

Next guide: Lynx Parts Compatibility by Series

Return to the Lynx Grill Repair Knowledge Hub for all Lynx repair and parts guidance.