This aftermarket DCS electrode and collector box is for the new style grills that use the stainless "U" shaped burner.
The electrode gets plugged into a 9 volt spark generator that is mounted to the back of the control panel.
The wire has a round female end that plugs directly into the igniter module. If the wire is not long enough, there is an extension wire enclosed that you can plug into the female end and them plug the flat spade into the ignition module.
Sold Individually
Fits DCS (Dynamic Cooking Systems) Models : 27DBQR, 27DBR, 27DSBQ, 27DSBQR, 27FSBQ, 27FSBQR, 36DBQ, 36DBQAR, 36DBQR, 36EBQAR, 48DBQ, 48DBQAR, 48DBQR, 48EBQAR, 48EBQR, BGA27-BQ, BGA27-BQR, BGA36-BQARL, BGA36-BQARN, BGA48-BQARL, BGA48-BQARN, BGA48-BQRL, BGA48-BQRN, BGB30-BQR, BGB36-BQAR, BGB48-BQAR, BGB48-BQR
Alternate Part # : 211717, 211718, 211720, 211721, 214293, 4850, 04850, IG33B, IG-33B, MCM04850, MCM050485004
To ensure you choose the correct replacement collector box for your grill, we recommend removing the original part and comparing it to what we list.
Posted by Nelson on 5th Jul 2016
My old electrode was fractured and sparking at the fracture. The new one has heat shrink on the first 1/3 of the length. Great idea that may insulate if the ceramic fractures again. Only problem is it does not slip thru the hole in the collector box! Had to cut it back for electrode to install properly. Works for now, but when ceramic fractures it will be time to replace.