Loading  Loading... Please wait...

  • 17 x 24, Single Access Door, Right Hinge, 260 Series
  • 17 x 24, Single Access Door, Left Hinge, 260 Series
  • Corner Detail
  • Frame Detail
  • Hinge Detail

17 x 24, Single Access Door, 260 Series


Brand / Category:


Product Description

PCM-260-17X24V BBQ Depot Outdoor Kitchen Built In 260 Series 17 Inch By 24 Inch Vertical Single Access Door

  • High Quality USA Craftsmanship 
  • Constructed of Commercial Quality 18 Gauge 304 Stainless Steel 
  • Solid Frames 
  • Fully Adjustable Hinges 


Overall dimensions (inches)~ W 19 1/2 x H 26 1/2

Cut out dimensions (inches)~ W 17.25 x H 24.25 x D 2

NOTE: Actual dimensions may vary.


Cut out dimensions:  refer to the cabinet opening where the component flanges will be attached.  Cut out openings must be constructed to the cut out dimensions.  Expressed measurements allow a  ?” space on all sides between flanges and framework to allow the flanges to slide into the opening without binding.  If openings are slightly too large, insert shims between framework and flanges.  If openings are too small, the framework will have to be adjusted.  Ideally, you would have the product on site prior to the start of construction. 

Overall dimensions:  include the frame.  Width is measured horizontally from the outside edges of the exterior frame, height is measured vertically including the frame.  To get approximate overall dimensions, add 1" on all sides to the cut out width and height measurements.  Use these numbers to plan the design and placement of appliances in your outdoor kitchen.

Reviews of the 17 x 24, Single Access Door, 260 Series Write a Review

This product hasn't received any reviews yet. Be the first to review this product!

Stay Connected

© Copyright The BBQ Depot, BBQ Grills, parts and accessories. All Rights Reserved.
payment options

Main Categories