6mm Brass Orifice Valve, AOG, BBQ Galore, Charbroil - 31500

Reviews

1. ok product

   The orifices seem ok, but they do not fit a Dyna-Glo BBQ. the 6mm id is correct, but the thread pitch is wrong. I contacted BBQ depot to see if they had orifices with a different thread pitch. They told me "no"

   Verified Customer Unknown - 14th Aug 2022

2. It worked!!!

   Thank you so much, my conversion worked!!!

   Verified Customer Amy Hayden - 26th Apr 2022

3. Fit a Weber Genesis II E-310

   I ordered these to convert my Weber Genesis II E-310 from NG to LP. They fit and work fine after drilling to proper size, however I ended up replacing the whole manifold with a new LP version. The valves in the NG manifold are not right for LP and I wasn't happy with the result -- it worked ok but no temp control on the low end. If you are converting from NG to LG consider replacing the whole manifold so you get the right size orifice AND the correct valves. Two thumbs up to BBQ Depot for customer service and fast shipping!

   Verified Customer Josh - 20th Jan 2022

4. Just what I need

   To convert natural gas grill to propane

   Verified Customer Unknown - 22nd Dec 2021

5. Works great for Charbroil Commercial series

   Received a grill that was already converted to natural gas and wanted to convert it back to propane. Unfortunately the previous people didn’t keep the orifices. Very hard to find part. Found it onthebbqdepot.com. Good shipping time and fits the grill.

   Verified Customer Walt - 24th Jun 2021

6. Perfect part

   Perfect part, fast service and helpful advise.

   Verified Customer Unknown - 20th Jun 2021

7. Good Product for requirement

   Orifices arrived on time and were just as described. The pilot hole was easy to drill out to specification.

   Verified Customer Unknown - 7th Feb 2021

8. Fast & Friendly

   Customer service staff very helpful in finding part I needed.
   Fit my Bull 7 burner.

   Verified Customer Paul Blum - 4th Jan 2021

9. Lower the flame

   Very good product, at a great price and great service.
   Drilled to the opening to what I wanted and the side burner, now calmly cooks, rather than blasts.
   Went from a 64 to a 68.

   Verified Customer Unknown - 3rd Dec 2020

10. beautiful brass

    sorry it had to be installed and not framed

    Verified Customer Unknown - 23rd Sep 2020

11. Product was perfect

    Easy to drill out to desired size! Thred fit like a gem!

    Verified Customer Steven Vitale - 15th Aug 2020

12. Webber orifice

    Good advice per phone call exactly what I needed

    Verified Customer Unknown - 9th Apr 2020

13. Just the ticket.

    I ordered these orifices so I could convert my Weber Genesis II from NG to LP. These were exactly what needed. I brought them to a machine shop near me and they were able to drill them to spec. So thanks BBQ depot for your help. On the downside shipping fees were ludicrous. The product cost me 7$ the lowest shipping fee was 4 or 5 Times that price.

    Verified Customer Nlamorgia@gmail.com - 28th Jan 2020

14. So far, not so bad

    Ordered 6 of the same orfices (6mm) and got 5 as expected and one 5mm. Called and was promised a prompt replacement. Have not seen it yet though.
    Other than that, there is not much to say about a tiny piece of brass in which one drills the proper hole. Buying a “blank” sure beats the VIKING price. Heck, those people are so stuck up that they don’t even include the proper orfices when you order a propane stove and then try to clean you out when you call ‘em on it.

    Verified Customer RaMo - 2nd Feb 2019

15. Barbeques Galore Gas Orifice

    Bought a used Barbeques Galore grill that had one missing orifice. Bought this replacement orifice & drilled it to match the two other burners. Works perfectly!

    Verified Customer Tom T - 29th Dec 2018

16. Customer Service is great

    Not knowing which one would work for my grill. Contacted customer service a couple of times. They were there to help select the correct orifice . Fit was correct and install was easy. Thanks for your help and exact parts.

    Verified Customer Maynard Walker - 23rd Nov 2018

17. Thread matched Manifold

    Orifice fit the Manifold. BBQ Depot did not include the thread size in the specifications. Fortunately, it fit.

    Verified Customer Jim - 30th Oct 2018

18. Works

    Just gotta determine what size orifice you need based on BTU output of your burner, find the appropriate size drill bit and drill the jets yourself.
    Might be handy and worth a few extra bucks if BBQ Depot offered jets with full size orifice.

    Verified Customer TheFatMan - 27th Oct 2018

19. These orfices would not fit my barbecue

    Ordered 4 orfices for changing my NG barbecue to LP as I already had a proper LP hose and regulator. Description of the product made me believe they would fit a Weber Genesis barbecue but they fit to loss to tighten in properly so I couldn't use them. Kept them as shipping would be as much as the 4 orfices cost me. On the positive side service was excellent and product arrived quickly. I would definently buy here again.

    Verified Customer Unknown - 31st Jan 2018

20. Fits also Dyna Glo grill DGF510SBP

    Quick delivery, fair pricing.

    Verified Customer Roman Jaklitsch - 5th Oct 2017

21. Worked Perfectly

    The part was direct replacement for the existing part. The orifice size is determined by your drill size.

    Verified Customer Unknown - 15th Aug 2016

Write A Review