This two stage regulator is approved for use in portable applications and outdoor cooking appliances ulitizing low pressure.
The regulator features all-zinc body construction, high and low 1/8" NPT pressure tap ports, an integral drip lip vent and optional 90° vent location.
This series two-stage regulator meets RVIA, UL and NFPA test requirements.
Max. inlet pressure : 250 PSI
Inlet connection: 1/4" FNPT
Outlet connection: 3/8" FNPT
Vent 90° vent
Exterior finish: raw zinc
Diaphragm: fabric reinforced molded with O-ring bonnet/body seal.
Diaphragm Type: internal relief - spring loaded
Bonnet/body material: die-cast zinc
Listing UP listed/UL 144
Mounting holes 3 1/2" on center
Pressure taps: 1/8" FNPT plugged
Please check your owner's manual to make sure this part will work with your grill or appliance