90175 Lynx 54" Hot Surface Ignition System Kit

This kit fits Lynx 54-in Model

Lynx is no longer servicing older ignitions in the J & K series. Grills must be upgraded to this new system.

Ignitor Kit Components :

A. Main Ignitor and Shields - There Are 2 3 or 4 Depending On The Kit You Are Installing
B. ProSear Burner Shield - One Is Pre-assembled and Provided In Each Kit
C. Long Hot Surface Ignitors For Each Cast Burner - There Are 2 3 or 4 Depending On The Kit You Are Installing
D. Short Hot Surface Ignitors For the ProSear and Rotisserie Burners - There Are 2 or 3 Depending On The Kit You Are Installing. Note : One Of These Ignitors Will Have Different Wire Connectors - This Ignitor Is For Attachment To Item B For Use With The Sear Burner
E. Wire Assemblies To Replace All The Connectors To Each Ignitor
F. Transformer With Mounting Brackets and A Y-Connector

Screws and Nuts For Assembly and To Replace Any Damaged During Installation

Old Part# 90142

To ensure you choose the correct replacement part for your Lynx grill you will need to know the series of your bbq grill.  If you are unsure please email us and or call us we will be able to verify you will be ordering the correct part.