Lynx Main Burner Hot Surface Electrode - 33556
Lynx Main Burner Hot Surface Electrode Part 33556
OEM Lynx Hot Surface Ignition Electrode for Main Burners and All-Sear Grills
This genuine Lynx hot surface ignition (HSI) electrode is used on select Lynx Professional 30", 36", 42" and 54" grills, including compatible All-Sear models. The electrode connection sits at the bottom of the stem and is commonly used for the center and right main burner positions.
Quick Fit Check
- OEM Part Number: 33556
- Fits: Lynx 30", 36", 42", 54" Professional Grills (see important fit note)
- Series Compatibility: N, P, Q, and U Series
- Common Burner Position: Center and right burner positions on many Lynx Professional grills manufactured before 09/07/2021
- Connection Location: Bottom of electrode stem
- Sold: Individually
Measurements
- Overall Length: Approximately 4" end to end
- Length from Bracket: Approximately 3 3/4"
- Shoulder Size: 5/32"
Important Fit Note
Lynx electrode configurations vary by grill model, burner type, and production year.
For grills with model numbers ending in "01", part 33051 is used on all ceramic Blue Flame burners, while part 33556 is used only on Trident (All-Sear) burners.
On many earlier Lynx Professional grills, part 33051 was typically used on the left burner position only, while all burners to the right used 33556.Because Lynx made several ignition system changes over the years, we strongly recommend verifying your existing electrode before ordering. If you have any questions or are unsure which electrode your grill requires, please contact us and we will help verify the correct part.
BBQ Depot Expert Tip
Write A Review
