33415 Lynx 30", 42", 54" Trident ProSear2 Burner, Long (Includes Screen)
OEM Lynx 33415 ProSear2 (Trident) Infrared Burner with Screen
Restore the original infrared cooking performance of select Lynx Professional 30", 42", and 54" gas grills with this genuine OEM ProSear2 (Trident) replacement burner.
Sold Individually
Quick Fit Check
- OEM Part: 33415
- Fits: Select Lynx Professional 30", 42" & 54" grills
- Series: N, Q & U (verify model & serial)
- Type: ProSear2 (Trident) infrared burner with screen
- BTU Rating: 23,000 BTU
- Need the short version? 27" and 36" ProSear2 grills use OEM 33478.
About the ProSear2 (Trident) Burner
The Lynx ProSear2, also called the Trident burner, is a variable-temperature infrared burner that delivers intense radiant heat for steakhouse-quality searing while also allowing lower-temperature cooking. Unlike traditional blue-flame burners, infrared technology heats food directly for faster preheating, even cooking, and exceptional sear marks.
This genuine OEM replacement includes the infrared screen and is manufactured to the same specifications as the original factory-installed burner.
Important Fit Note
This burner fits only Lynx grills originally equipped with the ProSear2 (Trident) infrared burner. It does not replace Lynx ceramic blue-flame burners or the earlier rectangular ProSear infrared burners used on older Lynx models.
Compatible Models
Common compatible models include:
L30PSR-2, L30PSFR-2, L30ATR, L42PSR-2, L42PSFR-2, L42ATR, L54PSR-2, L54PSFR-2, L30TR, L42TR, L42TRF and L54TR.
Always verify your model and serial number before ordering. Need help? See our Lynx Grill Serial Number Guide.
Signs Your Burner Needs Replacement
- Cracked ceramic surface
- Burner housing has rusted through
- Uneven infrared glow
- Poor searing performance
- Burner will not heat properly after confirming the ignitor is working
BBQ Depot Tip: A loud whooshing sound is a sign that the burner needs to be replaced.
Installation Overview
- Turn off the gas supply and allow the grill to cool completely.
- Remove the cooking grate above the burner.
- Lift the burner from its support bracket and slide it away from the gas valve.
- Install the new burner over the valve orifice, ensuring it seats properly.
- Reinstall the cooking grate and test for proper ignition and even heating.
Frequently Asked Questions
Is the ProSear2 burner the same as the Trident burner?
Yes. Lynx uses both names for this variable-temperature infrared burner.
Does OEM part 33415 include the infrared screen?
Yes. The infrared screen is included.
Will this fit every Lynx Professional grill?
No. It fits only select 30", 42", and 54" Lynx Professional grills originally equipped with the ProSear2 (Trident) infrared burner.
What are the signs that Trident (ProSear2) burner needs replacement?
Signs include a cracked ceramic surface, a burner housing that has rusted through, uneven infrared glow, poor searing performance, or a burner that will not heat properly after confirming the ignitor is working. A loud whooshing sound is a sign that the burner needs to be replaced.
What should I inspect while replacing the burner?
Inspect the hot surface ignitor, cooking grates, briquette trays, and the remaining burners. Replacing worn components together can help restore even heating and reliable ignition.
Why Buy From The BBQ Depot?
Family owned since 1956 and an authorized Lynx dealer since the late 1990s, The BBQ Depot specializes in genuine Lynx replacement parts. Our team helps verify the correct part using your model and serial number before you order, reducing returns and ensuring proper fit and performance.
Write A Review
